SMOK RPM 2 Replacement Coil in UAE

SMOK RPM 2 Replacement Coil in UAE

SMOK RPM 2 Replacement Coil is a replaceable heating coil from the SMOK RPM 2 Coil Series, designed for compatible SMOK pod systems that use the RPM 2 coil platform. The series includes different resistance and coil constructions, allowing users to match the replacement coil to the specifications supported by their device and RPM 2-compatible pod.

SMOK’s current product guidance lists the RPM 2 Mesh 0.16Ω Coil, RPM 2 DC 0.6Ω MTL Coil, and an additional RPM 2 DC 0.25Ω Coil within the RPM 2 Series. Each standard replacement-coil package is listed as containing 5 coils.

This page provides factual product information about the SMOK RPM 2 Replacement Coil in UAE for adult vape-device users, including resistance options, coil construction, installation, compatibility considerations, and replacement guidance.

About SMOK RPM 2 Replacement Coils

The RPM 2 Series is a distinct SMOK replacement-coil platform. These coils are designed to be installed into compatible RPM 2 pods rather than functioning as complete replacement cartridges.

Unlike pods with permanently integrated heating elements, an RPM 2-compatible cartridge allows the coil to be replaced independently. Therefore, the pod may continue to be used when appropriate while the worn coil is removed and replaced with another compatible RPM 2 coil.

• Brand: SMOK
• Product Name: SMOK RPM 2 Replacement Coil
• Product Category: Replacement Vape Coil
• Coil Series: RPM 2 Series
• Available Official Variants: Mesh 0.16Ω, DC 0.6Ω MTL, DC 0.25Ω
• Installation Format: Replaceable coil installation
• Standard Pack Quantity: 5 coils per pack
• Market Context: UAE
• Store Reference: DXB Vape Club

SMOK RPM 2 Coil Options

RPM 2 Mesh 0.16Ω Coil

The RPM 2 Mesh 0.16Ω Coil uses a mesh-style heating element. SMOK’s RPM 2 documentation identifies this coil as part of the original RPM 2 device platform, while SMOK compliance documentation also records the 0.16Ω RPM 2 Meshed Coil with compatible products such as the IPX80 platform.

• Resistance: 0.16Ω
• Coil Type: Mesh
• Series: SMOK RPM 2
• Pack Quantity: 5 pieces per standard pack

When using any low-resistance replacement coil, users should follow the wattage and operating information supplied with the specific device and coil packaging rather than assuming settings from another SMOK coil series.

RPM 2 DC 0.6Ω MTL Coil

The RPM 2 DC 0.6Ω MTL Coil is another official RPM 2 Series option. The MTL designation identifies it as the mouth-to-lung-oriented coil within the RPM 2 range.

• Resistance: 0.6Ω
• Coil Type: DC
• Classification: MTL
• Series: SMOK RPM 2
• Pack Quantity: 5 pieces per standard pack

RPM 2 DC 0.25Ω Coil

SMOK’s current replacement-coil guidance also lists a RPM 2 DC 0.25Ω Coil within the RPM 2 Series. However, exact operating information should be taken from the packaging or documentation supplied with the specific coil version.

• Resistance: 0.25Ω
• Coil Type: DC
• Series: SMOK RPM 2

Key Product Features

• RPM 2 Coil Platform: Designed for pod systems specifically supporting SMOK RPM 2 replacement coils.
• Multiple Resistance Options: The RPM 2 Series includes mesh and DC configurations with different resistance values.
• Replaceable Coil Construction: The heating element can be replaced separately from a compatible RPM 2 pod.
• Mesh Option Available: The RPM 2 0.16Ω version uses mesh coil construction.
• MTL Option Available: The RPM 2 DC 0.6Ω coil is officially designated as an MTL coil.
• 5-Coil Pack: SMOK’s current product guidance lists RPM 2 replacement coils in packs of five.

Product Specifications

RPM 2 Mesh 0.16Ω vs DC 0.6Ω MTL

The 0.16Ω Mesh and 0.6Ω DC MTL coils are different RPM 2 configurations and should not be treated as identical replacement options.

Users should select only the resistance supported by their specific pod and device configuration. In addition, wattage and operating settings should follow the information supplied by SMOK for the exact coil being installed.

Compatibility

SMOK RPM 2 Replacement Coils are designed for the RPM 2 coil platform. They should be used only with cartridges and devices specifically identified as supporting RPM 2 coils.

Official SMOK documentation confirms RPM 2 coil use within products including:

• SMOK RPM 2 Kit: Uses an RPM 2 pod with RPM 2 Meshed 0.16Ω Coil.
• SMOK IPX80 Platform: SMOK compliance documentation identifies versions supplied with the RPM 2 Meshed 0.16Ω Coil.

SMOK manufactures several different coil families, including RPM, RPM 2, LP1, LP2, Nord, and others. Therefore, a coil should not be considered compatible merely because it carries the SMOK brand name.

RPM and RPM 2 Are Different Coil Series

RPM 2 coils should not be confused with the original SMOK RPM Coil Series. SMOK lists RPM and RPM 2 as separate product families with different replacement-coil options.

Before replacing a coil, verify that the pod itself is designed for the RPM 2 Series.

How to Replace an RPM 2 Coil

Replacement procedures can vary slightly depending on the pod system, so the device manual should remain the primary reference. In general, an RPM 2 replacement coil is installed into a compatible pod rather than directly into the battery device.

1. Remove the compatible pod from the device.
2. Remove the existing coil according to the device instructions.
3. Check the resistance marking on the replacement RPM 2 coil.
4. Insert the coil securely into the compatible pod.
5. Refill the pod if required by the device design.
6. Allow newly installed coil wicking material enough time to absorb liquid before operating the device.
7. Reinstall the pod and follow the manufacturer’s recommended operating settings.

Do not force a coil into a cartridge if the dimensions or connection do not match. Resistance, pod series, and device compatibility should be checked first.

When Should an RPM 2 Coil Be Replaced?

A replacement coil is a consumable heating component, so its usable period varies according to the device, liquid, settings, and individual usage conditions. There is no single replacement interval that applies to every user.

The coil should be inspected when:

• The device displays a coil-related connection problem.
• The coil or its seals appear physically damaged.
• The coil no longer operates normally within the manufacturer’s supported settings.
• The user is performing routine replacement according to the device manufacturer’s instructions.

Any persistent device error should also prompt inspection of the pod, contacts, coil seating, and manufacturer documentation rather than automatically assuming that the coil is the only cause.

Storage and Handling Guidance

Unused SMOK RPM 2 Replacement Coils should generally be kept clean, dry, and protected from excessive heat, moisture, dust, and physical damage.

• Keep unused coils in their original packaging until required.
• Avoid exposing coils to dust or debris before installation.
• Do not install a visibly damaged coil.
• Check seals and connection surfaces before use.
• Store vape hardware away from excessive heat and prolonged direct sunlight.
• Keep vape products and related components away from children.

Important Product Information

SMOK RPM 2 Replacement Coil in UAE refers to replacement heating coils belonging specifically to SMOK’s RPM 2 Series. Current official SMOK product guidance lists the RPM 2 Mesh 0.16Ω, RPM 2 DC 0.6Ω MTL, and RPM 2 DC 0.25Ω coil configurations, with standard replacement packs containing five coils.

However, not every RPM 2 coil version is suitable for every SMOK device. The exact device, pod, resistance, and supported operating specifications should always be confirmed before installation.

Frequently Asked Questions

1. What is the SMOK RPM 2 Replacement Coil?

SMOK RPM 2 Replacement Coil is a replaceable heating coil designed for compatible SMOK pods using the RPM 2 coil platform. It is a separate component installed inside a compatible cartridge rather than a complete replacement pod.

2. What resistance options are available for SMOK RPM 2 coils?

SMOK currently lists RPM 2 Mesh 0.16Ω, RPM 2 DC 0.6Ω MTL, and RPM 2 DC 0.25Ω coils. The exact option should be selected according to the specifications supported by the compatible device and pod.

3. How many SMOK RPM 2 Replacement Coils come in a pack?

SMOK’s current official guidance lists RPM 2 replacement coils in packs of five. Users should still confirm the quantity printed on the specific retail package.

4. Are SMOK RPM and RPM 2 coils the same?

No. SMOK lists RPM and RPM 2 as separate coil series. Therefore, users should confirm whether their cartridge accepts RPM 2 coils before installing a replacement.

5. Is the SMOK RPM 2 0.6Ω coil an MTL coil?

Yes. SMOK officially identifies the RPM 2 DC 0.6Ω coil as an MTL coil. It belongs to the RPM 2 Series and should only be used with a compatible RPM 2 pod and device.